Preparation after storage Taking the ATV out of storage and correctly preparing it will assure many kilometres and hours of trou- ble-free riding. Arctic Cat recom- mends the following procedure to prepare the ATV: 8. Take care that all screws, nuts and holding components are tighte- ned properly. 9. Make sure the steering moves freely and does not bind. 10. Check the spark plug. Clean or replace as necessary. 1. Clean the ATV thoroughly. 2. Clean the engine. Remove the cloth from the exhaust system. 3. Check all control wires and ca- bles for signs of wear or fraying. 4. Change the engine/transmission oil and fi lter. 5. Charge the battery; then install.
Connect the battery cables making sure to connect the positive cable fi rst. 6. Check the entire brake system (fl uid level, pads etc.), all controls, headlights, taillight, brake light and headlight aim. 7. Check the tire pressure. Page 50