. OPERATION EXPLANATION OF COMPONENTS reverse, to REMARK PCCS: Palm command control system Forward-reverse shifting Position (a): FORWARD Position (b): REVERSE Position N: Neutral Move to the front to drive forward; move to the rear to drive in reverse. right to turn the machine. The 3 - 59 JOYSTICK (STEERING, DIRECTIONAL AND GEAR SHIF (PCCS lever) This lever (2) is used steer the machine, or carry out counterrotation turns. Steering Position (L): Left turn n to the front or rear, operate the lever partially to the left or r ually in the same direction as the lever is operated. ully to the left or right, the machine will turn in a small radius. Position (R):
Right tur With the lever moved he machine will turn grad ually in the same direction as th e lever is operated If the lever is moved f ully to the left or right, the machi ne will turn in a small REMARK If the lever is released when steering the machine, the lever will ret urn to the (a) pos ition or the ( b) position a nd the machine will be return ed to straight movement. Gear shifting ering, direction, and gearshift lever) is in the RSE position, press switch (c) or (d) to shift me the switch is pressed, the transmission p one speed range. time the switch is pressed, the transmission down one speed range. mum travel speed in each speed range, see PAGE 5-2)".
When the joystick (ste ering, direction, and gearshift lev FORWARD or REVE the transmission. up switch (c): Each ti shifts u down switch (d): Each time the switch is pressed, the tr shifts down one speed range. For details of the maxi mum travel speed in each speed "SPECIFICATIONS ( REMARK When the transmis sion is shifted, the speed range being used i s displayed on th e display pa nel on the m onitor panel. Example: Neutral: N is displa FORWARD 2nd: F REVERSE 3rd: R3 When the parking l yed on the display panel. 2 is displayed on the display panel. is displayed on the display panel. ever is locked, P is displayed. earshift operation using the shift mode, see "SHIFTING GEAR (PAGE 3-136)".
Shift mode 2 is displayed on the display pan is displayed on the display pan ever is locked, P is displayed. For details of the g earshift operation using the shift mode, see " SHIFTING GEA 136)". Shift mode selection means th e operation to set the selected s peed range beforehand in th e N position.