Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE radiator guard, then remove cover (1). hole to check and clean hydraulic cooler fins (3). 3. Use compressed air to blow off the mud, dirt, or leaves clogging the hydraulic cooler fins. It is also possible to use steam or water in place of compressed air. CLEAN AFTERCOOLER FINS this purpose instead of compressed air. 4 - 37 CLEAN OIL COOLER FINS If the hydraulic cooler fins are c logged or there is dirt caught in the fins, clean and check 1. Loosen 4 bolts (2) of cove 2. When cover (1) is removed, there is a cleaning hole. Use this When cleaning the hydraulic co oler, it is possible to rotate the fan in reverse and switch the dire ction of the air flow.

Set the fan reverse mode on the user menu The fan reverse rotation speed i the fins. . s 100%, so it can be used to clean When the engine is running, the not work. fan rotation selector switch does 1. Open the engine side cover af shreds that clog the after-cooler eam or water may well be used for REMARK Check the hydraulic cooler hose s. If any hose is cracked or hardened by age, replace wi th a new hose. Also check and tighten all loose hose clam ps.