Komatsu — EVERY 1000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE REPLACE FUEL MAIN FILTER CARTRIDGE WARNING Container to catch the oil Prepare a filter wrench 4 - 75 After the engine has been ope rated, all parts are at high temperature, so do not replace the filter imme diately. Wait for all parts to cool down before starting High pressure is generated in side the engine fuel piping system when t When replacing the filter, wa it for at least 30 seconds after stopping th e engine to let the internal p ressure go down before replacing the filter. Do not bring any fire or flame Be careful when opening the air bleed plug in the fuel filter head.

It is s till under pressure, so fuel m NOTICE Genuine Komatsu fuel filter cartridges use a special filter that has hig hly efficient filtering ability. When replacing the filter cartridge, always use a genui ne Komatsu part. The common rail fuel injectio n system used on this machine consists of more precise parts than th e conventional injection pump and nozzle. If any part other than a genui ne Komatsu filter cartridge is used, dust or dirt may get in and cause pro blems with the injection system. Always avoid using substitute parts. When carrying out inspection or maintenance of the fuel system, pay m ore attention than normal to t he entry of dirt.

If dirt is stuck to any part, use fuel to wash it off completely. 1. Set the container to catc The fuel filter is found h the fuel under the filter cartridge. by opening the engine side cover on the left of the machin 2. Remove cover (A). e. 3. Using a filter wrench, tur n filter cartridge (1) counterclockwise on remove it. 4. Clean the filter holder, co at the packing surface of the new filter cartridge thinly with oil, th holder. en install the filter cartridge to the filter