. OPERATION EXPLANATION OF COMPONENTS DUAL TILT MODE MONITOR FLOAT MODE MONITOR mode 3 - 16 OPERATION MODE MONITO This monitor (2 ) displays the (P): Lights up when mode is se t to p ower mod (E): Lights up when mode is se t to e conomy m The mode switches every time t he o peration m ode selector is pressed. (Onl y machine s equipped with dual This monitor (3 ) lights up when the dual tilt mo de is selecte Whe n this mod e is not selected , the system is set to single tilt. Use the F1 key to s elect t he mode. This monitor (4 ) lights up when the FLOAT mo de is selecte Each time the FLOAT mode switch , the FLOAT is switched Method of selecting FLOAT mode: 1.
Press th e FLOAT m ode swit ch to selec t the FLOAT mod e. l 2. Keep th e button at th e top o f the work equipmen t press ed and o perat e the ever fully t o the LOWE R positio n. Method of canceling FLOAT mode: Press the FLOAT mode switch t o cancel th e FLOAT mode o r operate the b lade lever to the RAISE position . Or, mov e the l ever from the NEUTRAL t o LOWER position, r eleasing the button o n top of the work equipment knob.