Komatsu — MACHINE MONITOR

. OPERATION EXPLANATION OF COMPONENTS GAUGE HYDRAULIC OIL TEMPERATURE GAUGE 3 - 20 MULTI-GAU This gauge (12) displays a variety of item s, but the following e xplanation describes th e actuation f or th e power train oil tempera ture gauge an d hydraulic oil te mperature gauge. The indicat or should be in the green rang e during operations If t he indica tor enters the r ed range (A) dur ing operation, it means tha t the oil temperat ureis too high . If t his happens, turn the fue l control dial do wn to approx.

3 /4 of the maximum s peed, reduce the load, and wait for th e oil temperature to go down to the green r If t he indica tor enters the r ed range during operations and the alarm buzzer sounds, r un the engin e at l ow idling and wait for the oil temperatur (A) - (B) (A) - (C) : Green range (C) - (D) POWER T RAIN OIL TEM NOTICE If t he power train oil tempera ture gauge tends to enter red r ange (A) , shift down one s peed range to reduce the load on the power train during uring operations. NOTICE When the in dicator comes close to the red range during operation, the operatio hydraulic oil temperature has exceeded 102° C .

Then run th e engine at low idling or sto p it and wait for t he oil temperatur e to go down .