Komatsu — Inspection before troubleshooting

TROUBLESHOOTING INSPECTION BEFORE TROUBLESHOOTING INSPECTION BEFORE TROUBLESHOOTING 20-212 PC130-7 (1) Item Criterion Remedy Lubricating oil/Coolant 1. Check of level and type of fuel 2. Check of fuel for foreign matter 3. Check of fuel filter cartridge for clogging 4. Check of level and type of oil in engine oil pan 5. Check of engine oil filter for clogging 6. Check of coolant level 7. Check of air cleaner for clogging 8. Check of level and type of hydraulic oil 9. Check of hydraulic oil strainer for clogging 10. Check of hydraulic oil filter for clogging 11. Check of level and type of swing machinery oil 12.

Check of level and type of final drive oil — — — — — — — — — — — — Add fuel Clean or drain Replace Add oil Replace Add coolant Clean or replace Add oil Clean or drain Replace Add oil Add oil Electrical equipment 1. Check of battery terminal wires for looseness and corrosion 2. Check of alternator terminal wires for looseness and corrosion 3. Check of starting motor terminal wires for looseness and corrosion — — — Retighten or replace Retighten or replace Retighten or replace Hydraulic and mechanical equipment 1. Check for abnormal sound and smell 2. Check for oil leakage 3. Air bleeding operation — — — Repair Repair Bleed air Electrical parts 1.

Check of battery voltage (with engine stopped) 2. Check of electrolyte level 3. Check of wires for discoloration, burn, and removal of covers 4. Check of wires for removal of clamps and looseness 5. Check of wires for wetting with water (Particularly check connectors and terminals for wetting) 6. Check of fuses for breakage and corrosion 7. Check of alternator voltage (with engine at medium or higher speed) 8. Check of operating sound of battery relay (when starting switch is turned OFF and ON) 20 – 30V — — — — — Must be 27.5 - 29.5 V after operation of several min- utes.

— Charge or replace Add distilled water or replace electro- lyte Replace Repair Disconnect and dry connectors Replace Replace Replace