TROUBLESHOOTING CLASSIFICATION OF AND PROCEDURES FOR TROUBLESHOOTING Phenomena looking like troubles and troubleshooting Nos. 20-214 PC130-7 (1) No.
Phenomenon looking like trouble Troubleshooting Code display E-mode H-mode S-mode Phenomena related to user code or error code 1 User codes are displayed on monitor panel Accord- ing to dis- played code 2 If error code display function is checked, error codes are displayed Phenomena related to engine 3 Engine does not start easily (It always takes time to start) S-1 4 Engine does not start Engine does not crank E-1 S-2 a) 5 Engine cranks but exhaust smoke does not come out (Fuel is not injected) S-2 b) 6 Exhaust smoke comes out but engine does not start (Fuel is injected) S-2 c) 7 Engine speed does not rise sharply (Follow-up performance is low) S-3 8 Engine stops during operation E-2 S-4 9 Engine rotation is abnormal (Engine hunts) E-3 S-5 10 Output is insufficient (Power is low) S-6 11 Exhaust gas color is bad (Incomplete combustion) S-7 12 Oil is consumed much (or exhaust gas color is bad) S-8 13 Oil becomes dirty quickly S-9 14 Fuel is consumed much S-10 15 Coolant contains oil (or it blows back or reduces) S-11 16 Engine oil pressure caution lamp lights up (Oil pressure lowers) S-12 17 Oil level rises (Water or fuel is mixed in oil) S-13 18 Water temperature rises too high (Overheating) S-14 19 Abnormal sound comes out S-15 20 Vibration is excessive S-16 21 Engine does not stop E-4 22 Auto-decelerator does not operate E-5 H-5 23 Automatic warm-up system does not operate E-6 24 Preheater does not operate E-7 Phenomena related to work equipment, swing, and travel 25 Speed or power of whole work equipment, travel, and swing is low H-1 S-6 26 Engine speed lowers extremely or engine stalls H-2 S-4 27 Work equipment, travel, and swing systems do not work E-8 H-3 28 Abnormal sound comes out from around hydraulic pump H-4 29 Fine control performance or response is low H-6