TROUBLESHOOTING [116] Error code [116] (Trouble in storage of windshield wiper) 20-320 PC130-7 (1) User code Error code Trouble Trouble in storage of windshield wiper (Monitor panel system) – 116 Contents of trouble • When the wiper stored, the P-signals of the storage range is not input. Action of monitor panel • Turns the storage signal to the wiper motor OFF. Problem that appears on machine • The wiper is not stored. Related information • The input state (ON/OFF) from the P-signals of the wiper operating range can be checked with the mon- itoring function. (Code:
049, Left of upper line) Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective wiper motor (Internal disconnection) aPrepare with starting switch OFF, then carry out troubleshooting with- out turning starting switch. W04 (male) Wiper blade Resistance Between (4) and (5) Storage range Max. 1 z Operating range Min. 1 Mz 2 Disconnection in wiring harness (Disconnection in wiring harness or defective contact in connector) aPrepare with starting switch OFF, then carry out troubleshooting with- out turning starting switch. Wiring harness between P01 (female) (12) and W04 (female) (4) Resistance Max.
1 z Wiring harness between W04 (female) (5) and chassis ground (A11, A12) Resistance Max. 1 z 3 Defective monitor panel aPrepare with starting switch OFF, then turn starting switch ON and car- ry out troubleshooting. P01 Wiper blade Voltage Between (12) and chassis ground Storage range Max. 1 V Operating range 20 – 30 V