Komatsu — TROUBLESHOOTING

TROUBLESHOOTING [227] Error code [227] (Abnormality in engine speed sensor) 20-344 PC130-7 (1) User code Error code Trouble Abnormality in engine speed sensor (Governor and pump controller system) – 227 Contents of trouble • Normal pulse signals are not input to the signal circuit of the engine speed sensor. Action of controller • Controls as if in the E-mode. • If the cause of the failure disappears, the system resets itself. Problem that appears on machine • The output power is a little low (The engine speed cannot be sensed). Related information • The input state (ON/OFF) from the engine speed sensor can be checked with the monitoring function. (Code:

010, by 10 rpm) Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective engine speed sensor (Internal short cir- cuit or disconnection) aPrepare with starting switch OFF, then carry out troubleshooting with- out turning starting switch. E04 (male) Resistance Between (1) and (2) 500 – 1,000 z Between (1) and chassis ground Min. 1 Mz 2 Defective adjustment of engine speed sensor See TESTING AND ADJUSTING, Adjusting engine speed sensor.

3 Disconnection in wiring harness (Disconnection in wiring harness or defective contact in connector) aPrepare with starting switch OFF, then carry out troubleshooting with- out turning starting switch. Wiring harness between C01 (female) (40) and E04 (female) (1) Resistance Max. 1 z Wiring harness between C01 (female) (29), (39) and E04 (female) (2) Resistance Max. 1 z 4 Short circuit with power source in wiring harness (Contact with 24-V circuit) aPrepare with starting switch OFF, then turn starting switch ON and car- ry out troubleshooting. Between C01 (female) (40) – E04 (female) (1) wiring harness and chassis ground Voltage Max.

1 V 5 Defective governor and pump controller aPrepare with starting switch OFF, then carry out troubleshooting with- out turning starting switch. C02 Resistance Between (40) and (29), (39) 500 – 1,000 z Between (40) and chassis ground Min. 1 Mz