Komatsu — TROUBLESHOOTING

TROUBLESHOOTING [301], [302] Error code [301] (Engine low idling speed out of standard range) Error code [302] (Engine high idling speed out of standard range) 20-352 PC130-7 (1) User code Error code Trouble Engine low idling speed out of standard range (Governor and pump controller system) – 301 Contents of trouble • Engine speed below 500 rpm is sensed for continuous 10 seconds while the engine is running. Action of controller • None in particular. • If the cause of the failure disappears, the system resets itself. Problem that appears on machine • If the machine is operated as it is, the engine may be damaged.

Related information • The input state (rpm) from the engine speed sensor can be checked with the monitoring function. (Code: 010, by 10 rpm) Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Abnormality in mechanical system of engine Check for external and internal factors that have lowered the engine low idling speed, and then carry out troubleshooting for the mechanical sys- tem of the engine. 2 Defective governor and pump controller Troubleshooting cannot be carried out since the defect is in the gover- nor and pump controller.

(If there is not any visible trouble in the machine, the controller may be used as it is.) User code Error code Trouble Engine high idling speed out of standard range (Governor and pump controller system) – 302 Contents of trouble • Engine speed above 2,600 rpm is sensed for continuous 10 seconds while the engine is running. Action of controller • None in particular. • If the cause of the failure disappears, the system resets itself. Problem that appears on machine • If the machine is operated as it is, the engine may be damaged. Related information • The input state (rpm) from the engine speed sensor can be checked with the monitoring function. (Code:

010, by 10 rpm) Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Abnormality in mechanical system of engine Check for external and internal factors that have heightened the engine high idling speed, and then carry out troubleshooting for the mechanical system of the engine. 2 Defective governor and pump controller Troubleshooting cannot be carried out since the defect is in the gover- nor and pump controller. (If there is not any visible trouble in the machine, the controller may be used as it is.)