TROUBLESHOOTING METHOD OF USING TROUBLESHOOTING CHARTS The basic method of using the troubleshooting chart is as follows. Items listed for [Questions] and [Check items] that have a relationship with the Cause items are marked with Q , and of these, causes that have a high proba- bility are marked with w . Check each of the [Questions] and [Check items] in turn, and marked the Q or w in the chart for items where the problem appeared. The vertical column (Causes) that has the highest number of points is the most probable cause, so start troubleshooting for that item to make final confirmation of the cause. *1.
For [Confirm recent repair history] in the [Questions] Section, ask the user, and mark PC130-7 20-603 (1) e column with E to use as refer- locating the cause of the failure. do not use this when making cal- to narrow down the causes. E in the Cause column as refer- Degree of use (Operated for long the [Questions] section as refer- a rule, do not use it when calculat- oints for locating the cause, but it cluded if necessary to determine for troubleshooting.
*1 Confirm recent repair history *2 Degree of use Operated for long period Seized turbocherger, interference Clogged air cleaner element Worn piston ring, cylinder Clogged, seized injection nozzle Improper injection timing Defective injection pump (excessive injection) Degree of use Operated for long period