TROUBLESHOOTING S-9 S-9 Oil becomes contaminated quickly General causes why oil becomes contaminated quickly PC130-7 20-617 (1) Entry of exhaust gas due to internal wear Clogging of lubrication passage Improper fuel Improper oil used Operation under excessive load Causes nroW notsip ,gnir rednilyc renil deggolC ,rehtaerb rehtaerb esoh Clogged oil filter Worn valve, valve guide Clogged oil cooler Clogged turbocharger oil drain tube Defective seal at turbocharger turbine end Exhaust smoke is black Questions Check items Confirm recent repair history Degree of use of machine Operated for long period Engine oil must be added more frequently Non-specified oil is being used Color of exhaust gas Blue under light load Black Amount of blow-by gas Excessive ust smoke is black”.
None When oil filter is inspected, metal particles are found When exhaust pipe is removed, inside is found to be dirty with oil Engine oil temperature rises quickly Exha Troubleshooting When compression pressure is measured, it is found to be low Carry out troubleshooting for “ When breather element is inspected directly, hose is broken or is found to be clogged with dirty oil When oil filter is inspected directly, it is found to be clogged When oil cooler is inspected directly, it is found to be clogged Turbocharger oil drain tube is clogged Excessive play of turbocharger shaft When safety valve is directly inspected, spring is found to be catching or broken Remedy Replace Clean Replace Replace Clean Clean Replace —