TROUBLESHOOTING S-16 S-16 Vibration is excessive a If there is abnormal noise together with the vibra- tion, carry out troubleshooting also for Abnormal noise is made . 20-624 PC130-7 (1) eral causes why vibration is excessive Defective parts (abnormal wear, breakage) Improper alignment Abnormal combustion Causes nroW gnitcennoc ,dor niam gniraeb nroW mac gnihsub Loose engine mounting bolts, broken cushion Broken part inside output shaft (damper) Center of engine and power train misaligned Improper gear train backlash Defective dynamic valve system (valve, rocker lever, etc.
stuck) Defective injection pump (excessive fuel injection) Questions Check items Confirm recent repair history Degree of use of machine Operated for long period Condition of vibration Suddenly increased Gradually increased Non-specified oil is being used Metal particles are found in oil filter Metal particles are found when oil is drained Oil pressure is low at low idling Vibration occurs at mid-range speed Vibration follows engine speed Exhaust smoke is black Seal on injection pump has come off Troubleshooting Remove oil pan and inspect directly Remove side cover and inspect directly Inspect directly for loose engine mounting bolts, broken cushion Inspect inside of output shaft (damper) directly When face runout and radial runout are inspected, they are found to be incorrect Remove front cover and inspect directly Remove head cover and inspect directly Injection pump test shows that injection amount is incorrect Remedy Replace Replace Replace Replace Correct Correct Replace Adjust