TESTING AND ADJUSTING SPECIAL FUNCTIONS OF MONITOR PANEL 4. Monitoring function [02] With this function, you can monitor the revolution speed, oil pressure, current, voltage, input condi- tion, output condition, etc. in real time by the sig- nals from the sensors, switches, and solenoids installed to various parts of the machine. 3) Information displayed in display section and service meter section 1 (When numeral code is displayed) If a numeral monitoring code is selected, the following information is displayed in display section (1) and service meter section (2). (a): Monitoring code (b): Monitoring information (Value is dis- played) 1) Selecting and executing function i) Select menu No.
[02] in the menu selec- tion mode. ii) Press set switch (5) to execute this func- tion. 2) Selecting and executing monitoring code Holding caution buzzer stop switch (3), oper- ate working mode selector switches (7) and (8) to select a monitoring code displayed in service meter section (1). UP switch (7): Code No. increases. DOWN switch (8): Code No. decreases. a This function displays monitoring code [001] and its information first. a For the items and code Nos. which you can monitor, see the "Monitoring codes table". PC130-7 20-155 (1)