TESTING AND ADJUSTING STANDARD VALUE TABLE FOR ENGINE STANDARD VALUE TABLE FOR ENGINE 20-2 PC130-7 (1) Model name PC130-7 Engine SAA4D95LE-3 Item Measurement condition Unit Standard value Permissible value Engine speed High idling Low idling Rated speed rpm 2,350 ± 100 1,100 ± 50 2,200 2,350 ± 100 1,100 ± 50 — Exhaust gas color During sharp acceleration During high idling Bosch index Max. 4.5 Max. 1.0 Max. 6.5 Max. 2.0 Valve clearance (Cooled) Intake valve Exhaust valve mm 0.35 0.50 — — Compression pressure Oil temperature: 40 – 60 °C (Engine speed) MPa {kg/cm2} (rpm) Min. 2.9 {Min. 30} (320 – 360) 2.0 {20} (320 – 360) Blow-by pressure Coolant temperature:
Within operating range At rated output kPa {mmH2O} Max. 0.49 {Max. 50} 0.98 {100} Oil pressure Coolant temperature: Within operating range At high idling (SAE30) At high idling (SAE10W) At low idling (SAE30) At high idling (SAE10W) MPa {kg/cm2} 0.34 – 0.59 {3.5 – 6.0} 0.29 – 0.54 {3.0 – 5.5} Min. 0.1 {Min. 1.0} Min. 0.08 {Min.
0.8} 0.25 {2.5} 0.21 {2.1} 0.07 {0.7} 0.07 {0.7} Oil temperature Through speed range (In oil pan) °C 90 – 110 120 Fuel injection timing Before top dead center (BTDC) ° 6 ± 0.75 6 ± 0.75 Fan belt tension Deflection under finger pressure of 58.8 N {6 kg} mm 6 – 10 6 – 10 Air conditioner compres- sor belt tension Deflection under finger pressure of 58.8 N {6 kg} mm 6 – 10 6 – 10