Komatsu — HANDLING THE TIRES

. OPERATION OPERATION HANDLING THE TIRES PRECAUTIONS WHEN HANDLING TIRES CAUTION equipment wear or other Please contact your Komatsu distributor when replacing the tires. It is dangerous to jack up the machine without taking due care. 3 - 79 If a tire has reac hed any of the following service limits , ther the tire may burs t or cause an accident, so to ensure s afety a n ew tire. Service limits When the rem tires (at a poin on a new tire.

When the tir abnormal we Service limits ar, or when the cord la for damage When there is external damage exte nding to the c ord or is broken When the cor d is cut or there is dra When the tire is peeling (there is se When the bea d is damaged For tubeless tires, when there is air leakage or imprope TIRE PRESS URE re pressure before starting operations, when the tires are cool. Measure the ti re pressure before s tarting operations If t he tire inflat ion pressure is too l ow, there will be o verload; if it is too high, it will cause tire cuts and shock burst.

To prevent the se problems, adjust the tire inflation p ressure according to the table on th Deflection rati As a guideline that can be checke d visibly, the deflection ratio of the front tire (deflection /free height) is as follows. When carrying normal load (lift arm horizontal): Approx. 15 to 25 % . 25 to 35 % When digging (rear wheels off gro und): Approx . 25 t When checkin g the tire inflation pre ssure, check also for small scratches or peeling of the tire, for nails or pieces of metal which m ay cause punctures , and for any abnormal wear.