Komatsu — METHOD OF LIFTING MACHINE

. OPERATION TRANSPORTATION 2. Move the work equipment safety lock lever to the LOCK position. 3 - 86 LIFTING PROCEDURE The machine c an be lifted only if it has hook mark l abel When lifting th e machine, stop the machine on leve l ground and 1. Start the e ngine, make sure th at the machine then set th e work equipment to For details , see "PREPARATIO NS FOR MOVING MACHINE (PAGE 3-5 3. Stop the e ngine, check that th e area around the operator's compartme nt is safe, then lock with the safety bar s o tha t the front frame and rear frame do n ot articulate. 4.

Select wir e ropes, slings, spr eader bars an d ot her l ifting equipment to match the weight of the machine, and fit the wire ropes to th e lifting hooks at the f ront of the front fram e an d the rear of the rear frame (lifting ho ok marks). the ground (raised 10 to 20 5. When the machine comes off cm(3.9 to 7 .9 in)), stop the lifting operation, chec k carefully that the machin e is balanced and th at the wire ropes are not lo ose, then contin ue the lifting operatio n slowly.