Komatsu — WARMING-UP OPERATION FOR STEERING HYDRAULIC CIRCUIT IN COLD WEATHER

. OPERATION COLD WEATHER OPERATION viscosity. For details, see "RECOMMENDED FUEL, WARMING-UP OPERATION FOR STEERING HYDRAULIC CIRCUIT IN COLD WEATHER WARNING 3 - 89 AFTER COLD W When the season c hanges and the weather becomes Replace all fuel a nd oil with fuel and oil o LUBRICANT (PAGE 4-9 If the steering wheel i s operated and stopped whi le the oil low, there may be a ti me lag before the machine s tops turnin In this case, use the s afety bar to ensure safety, a nd perform the w operation in a wide pla Do not relieve the hyd raulic oil in the circuit conti nuously for more seconds.

When the temperat ure is low, do not start th e operatio n of t he machine immediately aft Warming up steerin g hydraulic circuit Slowly operate the s teering wheel to the left a nd right to war m up the oil in the steering val ve. (Repeat this operation for about 10 minute s to warm up the oil.) NOTICE Turn the steering whee l a little and stop in that posi tion. Confirm th at the machine turns by an angle equivalent to the amount that the steering wheel is t urned. RECOMMENDED OIL Select the oil from t he table below according to the ambien If SAE5W-20CD is used in the cold season, replace it with TO10 oil when the cold seas