. MAINTENANCE SERVICE PROCEDURE CHECK INFLATION PRESSURE OF TIRES WARNING CHECK Tire size Inflation pressure 26.5-25-20PR (L3 Rock) (Standard) Front Tire: 0.44MPa (4.5 kg/cm 2 , 63.9 PSI) Rear Tire: 0.34MPa (3.5 kg/cm 2 , 49.7 PSI) 29.5-25-22PR (L3 Rock) (Option) Front Tire: 0.44MPa (4.5 kg/cm 2 , 63.9 PSI) Rear Tire: 0.34MPa (3.5 kg/cm 2 , 49.7 PSI) NOTICE The optimum inflation pressure differs according to the type of work. For details, see "HANDLING THE TIRES (PAGE 3-79)". 4 - 36 When inflating a tire, che ck that no one will enter the working are a. Use an air chuck which has a cli p and which can be fixed to the air valve .
While inflating the tire , check the inflation pressure occasional ly so t hat it will not rise too hig h. If the rim is not fitted n ormally, it may be broken an d scattered while the tire is inflated. To ensu re safety, place a guard arou nd the tire a nd do not work in front of the ri m but work on the tread side of the tire. f the rim Abnormal drop of inf lation pressure and abnorm al fitting o rim indicate trouble in the tire or rim. In this case, be su re to ask a t ire repair shop to carry out rep airs. e specified inflation pressure. ation pressure of the tires just after high-speed ork.
Be sure to observe th e specified inflation pressure Do not adjust the infl travel or heavy-duty w Measure the inflation pressure with a tire press ure gauge , whil e the tires are cool, before s INFLATION OF TIRES ssure properly. Adjust the inflation pre When inflating a tire, use an air chuck which ca n be fixed to th e air valve of the tire as sho wn in the figure. Do not work in front of the rim but work on the tread sid e of the ti The proper inflation pr essure is shown below.