. ATTACHMENTS, OPTIONS HANDLING JOYSTICK STEERING SYSTEM OPERATION METHOD OF JOYSTICK STEERING SYSTEM CAUTION 6 - 18 When operating with joystick steering wheel so that it is pos monitor. lever (4), always adjust the angle of the sible to see the FNR display on the machine 1. Sit on the operator's s eat and pull up lever (1) to unlock the joystick console, then s lide the latter from the rear positio n to the forward stroke end, Under this condition, s on. Adjust joystick (4) to the angl adjustment lever (3). e for easy operation with c onsole box (See "ADJUSTMENT OF JOYSTICK 1)".) ) operates normally and the directinal JOYSTICK CONSOLE (PAGE 6-2 2. Fasten the seat belt.
Confirm that joystick (4 lever of the transmissi 3. on is a the neutral positio n and the periphery of the vehicle is safe. Then, start the en gine. 4. Turn on joystick ON/OF FNR button (6) on joysti ck (4) head is set to the neut ral position automatically. 5. If joystick (4) is turned to the right the machine turns to the ri ght, and if the former is turn ed to the left,the latter turns to the left. The more the joystick is turned sharply, the more th e machine turns quickly. 6. After the machine turns to the desired angle, return t he joystick to the neutral position. chine in the straight position, turn the 7.
When returning the ma the joystick in the opposite direction from the neutral p osition (If it was turned to the right, turn it to the left). Even when the joystick is returned to the neutral p osition, the machine remains at the same angle of articulation. It does not return to the straight tra vel position.