. ATTACHMENTS, OPTIONS HANDLING JOYSTICK STEERING SYSTEM PRECAUTIONS FOR STEERING WITH JOYSTICK WARNING 6 - 20 e and transmission cannot be operate machine with the brake first. The n, turn off the joyst ick ON/OFF switch and move to a safe place by using the steering wheel and direction Before startin g the operation of th e machine again, f ind out and repair t he troubled part and confirm normal. For t he troubleshooting and repair, please c ontact your Komat Never operat e the machine before it is repaired com Do not mov e the joystick to the left or right until the N display on the machin e monitor FNR display lights up to indicate that the eady.
joystick is r The joystick If the joystic controllersenses t k is moved before he neutral positio the neutral positi n of the joystick. on is sensed, an error is dete steering sys cted and the caut tem does not wor ion lamp flashes and the joystick k. If an error is indicated, turn off the joystick ON/O FF switch, then turn it on ag ain. If the machi ne is steered with the steering whe el, its turning ang le is fixed when turning of the latter is stopped.If the machin e is steered with the joystick and the latter is held turned, however, the machine is steered to the d.
articulate en Since the fe el of steering of the joystick is differ ent from the steer ing wheel, take care suffic iently until you are get accustomed to the joystick. If the F or R button at the joys tick head is push ed and held mor e than 30 seconds, a shor t circuit is sensed and an error is i ndicated. e buttons only when required. onal lever is not at the neutral position, when the joystick ON/OFF switch is turned off, the neutral cuit prevents it from turning to the joystick lever side. Since the transmission is kept at the neutral machine cannot move either forward or in reverse. , turn the directional lever to the neutral position, then turn off the joystick ON/OFF switch.
Touch thes e buttons only whe If the directi onal lever is not a interlock cir cuit prevents it fro m turning to the j oystick lever sid position, the machine cannot move either forw ard or in reverse. In this case , turn the direction al lever to the ne utral position, the n turn off the joystick ON/ If the electri c circuit of the joyst ick steering syste m or transmissio n control system has trou ble, the central caution lamp (Red) on the left side of the main monitor flashes to notify the trouble to the operato r.
s, turn off the joystick Since both steering system a nd transmission are set in the re spective neutral position ON/OFF sw itch, then drive th e machine with th e steering wheel and the directional lever.