. ATTACHMENTS, OPTIONS HANDLING JOYSTICK HANDLING JOYSTICK EXPLANATION OF COMPONENTS (1) (2) Joystick Kick-down switch (3) Hold switch JOYSTICK This lever (1) is used to operate the bucket and lift arm. OPERATING BUCKET Position (a): Dump Position (b): HOLD The bucket is kept in the same position. Position (c): Tilt If the lever is pulled further from the TILT position, the lever stops at that position. The bucket positioner is adjusted to that position, and at the same time, the lever returns to the HOLD position. 6 - 24 Normally, two control l evers are used to op erate the bucket and lift arm, but with the joystick, the bucket and li can both be operated with the same lever.
This makes operation easier becau se it means that there is no n switch between levers when carrying out o