Komatsu — SEAT ADJUSTMENT

. ATTACHMENTS, OPTIONS HANDLING AIR-SUSPENSION SEAT HANDLING AIR-SUSPENSION SEAT SEAT ADJUSTMENT WARNING tilt it the 6 - 27 Park the machine in a s afe place and stop the engine when carryi ng out ad justment of the operator' Adjust the seat position at the beginning of each shif t or when o perators c hange. Adjust the seat so that the brake pedal can be depres sed all the way down with the operator's back (A) Fore-and-aft adjust ment Pull lever (1) up, set the seat to the desired positio n, then rel the lever. 180 mm (7.1 in) (10 mm (0.4 in) x 18 stages) Amount of adjustment:

(10 mm (0.4 in) x 18 stage (B) Adjusting seat angle push down on the rear of the seat to Move lever (2) up and backward. Move lever (2) down an d push down on the front of the seat it forward. Adjustment range: 13 d egrees (Front tilt, rear tilt: 4 stages e (C) Setting seat for ope rator's weight ate valve (3) to adjust the strength o Sit in the seat and oper suspension. Amount of adjustment: 50 to 120 kg (110.3 to 264 .6 lb) (targ Push: Suspension beco mes stronger es weaker Pull: Suspension becom (D) Adjusting backrest angle Move lever (4) up and move the backrest to the fr ont or rear. Adjustment range:

Fron t 66 degrees (3 degrees x 22 stages Rea r 72 degrees (3 degrees x 24 stages) NOTICE If the seat back is reclined too far, the seat back may hit t he rear glas s, so use i t in a position where it do es not contact the glass.