. ATTACHMENTS, OPTIONS HANDLING BRAKE COOLING SYSTEM ATTACHMENTS, OPTIONS HANDLING BRAKE COOLING SYSTEM the oil. draining the oil, clean drain plugs (2), (3) and (4), then Q'ty: 2 REMARK 6 - 51 3. Stop the machine so that drain plug (4) of the final drive is a bottom. Remove oil filler plug (5) and drain plug (4), and d 4. install t 5. Using a filter wrench, turn brake cooling oil filter cartridge (6 the insi de of the fram e to the left to re 6. Open e ngine side co ver (7) on the left s ide of the machine, using a filter wrench, turn brake coolin g oil filter cartridge ( the left to remove it. 7. Clean t he filter holde r, then tighten the new filter cartridge Filter ca rtridge part N o:
425-S05-2700 8. Add oil t o the specifie d level through the oil filler ports (1) an d (5) of the axle housing and left and right final drives 9. 9. After adding the o il, check that the oil is at the specifie d level. For details, see "C HECK AXLE OIL LEVEL, ADD OI L (PAGE 6-4 For operati ons where th e brake is used fre quently, change th e axle oil at shorter interval