Komatsu — MACHINE MONITOR

. OPERATION EXPLANATION OF COMPONENTS The machine monitor system consists of the main monitor (in front of seat) and the maintenance monitor (on the right side of the operator's seat). The monitor system can be divided functionally into the warning display portions (B, E) and the meter display portions (A, C, D), and option display portion (F). CAUTION 3 - 6 the operato These monitors do not guarantee the condition of the machine. Do not simply rely on the monitor whe n carrying out checks before starting (daily i nspection ). Always get off th e machin e and check each item directly. WARNING DISPLAYS (PAGE 3-7)".

k lamp (CHECK), central warning lamp (CAUTION), and warning pilot lamps See (B, E) "WARNING DISPLAY These consist of the central chec and mps (enginewater level, engine oil leve l, brake oil pressure, engine oil pressure, b attery c harge , an d air clea ner clogging, emergency steering). METER DISPLAY PORTION PORTION (PAGE 3-12)".

edometer, fuel gauge, engine water temperature gauge, torque converter oil See (A, C, D) "METER DISPLAY These consist of the meters (spe mperatur convert oil temperature gauge, service meter , transmission shift indicator) and the pilot lamps (t urn signa l indicat or, head l amp Hi beam, preheating, front working lamp, rear working lamp, transmission c ut-off, pa rking brake, trans mission auto shift/manual selector). OPTION DISPLAY PORTION (F) This consists of the monitor lamps and switches for the E.C.S.S., auto-greasing sy stem, and remote positioner. For details of each system or com ponent, see "ATTACHMENTS, OPTION S (PAG E 6-1)".

TESTING ACTUATION OF MACHINE M ONITOR SYSTEM d to the ON position before starting the engine, all monitor lamps, gauges, and When the starting switch is turne gauges, centralized warning lamps will ligh t up for approx. 3 seconds, and the alarm buzzer w ill sound for appr ox. 1 second. When this happens, 88 is displaye d on the speedometer, and 8 is displaye d on the transmission shif t indicator. Finally, there will be two beeps to indicate that the monitor check has been comple If the monitor lamps do not light u p, there is probably a failure or disconnection, so distributor for inspection.

When the starting switch is turned to the ON position, if the directional lever is not at the neutr al positio n, the central warning lamp (CAUTION) will flas h and the alarm buzzer will sound intermittently. I f this happens, re turn the l ever to the neutral position, and the lam ps will go out and the buzzer will stop. ngine has been stopped. The monitor check cannot be carr ied out for at least 30 seconds after the e ngine h as been s topped. ontact y our Komatsu