Komatsu — MACHINE MONITOR

. OPERATION EXPLANATION OF COMPONENTS CENTRAL CHECK LAMP (CHECK) WARNING inspection and maintenance of the CENTRAL CAUTION LAMP (CAUTION) WARNING 3 - 8 If this monitor flashes, carry out appropriate location as soon as pos If any abnormality is found in the CHECK items before starting the engine (engine oil level, engine water level), the monitor lamp for the abnormal locatio n will flash and central check lamp (CHECK) (1) will also flash. Check the location where the monitor lamp is flashing and carry out the check before starting. When carrying out the checks before starting, do not rely simply on the monitor.

Always carr y out the specified check before starting items "CHECK BEFO RE STARTING (PAGE 3-38)". When carrying out checks be fore starting, if the engine oil level is abnormal, the engine oil lev el will change when the engine is started, so even if there is a ny abnormality, the central check op flashing. lamp and monitor lamp will st If there is any abnormality in t he engine water level, the central check lamp will go out when t he engine is started, but instead of this, the central caution lamp will flash and the alarm buzzer will sound intermittently.

If there is any abnormality in t he battery charging system when the engine is running, the bat tery charge caution pilot lamp will flash and the central CHECK l amp (1) will also flash at the same time. If the lamps flash, chec k the charging circuit. If t his monitor flashes, stop the eng ine immediately or run it at low idling and do as follows.

If there is an abnormality in an y CAUTION item when the engine is running (engine water te temperature, engine water le mperature, torque converter oil vel, brake oil pressure, engine oil pressure), the alarm buzzer will sound intermittently and the monitor lamp for the location o f the abnormality will flash and the central CAUTION lamp (2) wi ll also flash. red range when the engine is If the fuel gauge enters the running, the fuel gauge will fla sh and the central CAUTION lamp (2) will also flash. If they flash , check the fuel level and add fuel.