. OPERATION EXPLANATION OF COMPONENTS BRAKE OIL PRESSURE CAUTION PILOT LAMP This lamp (5) warns the operator that the brake oil dropped. When carrying out checks before starting: When the engine is stopped, the brake oil pressure circuit is not actuated, so the caution pilot lamp and central CHECK lamp are also off. 3 - 10 pressure has When opera ting: oil pressure goes down, the caution pilot lamp and If the brake lamp and central CAU TION lamp will flash, a nd the alarm buzzer will so und intermittently . If the monitor la mps flash, stop the engine . gine immediately and check the brake o il pressure circuit REMARK lamp may flash and go out after approx.
10 seconds immediately after the engine is started. This is The monitor lamp may flash and g . 10 seconds immediately ngine is started . Th is is because pre ssure is being stored i n the brake accumulator. I t doe s not indicate any abno rmality. ENGINE OIL PRESSURE CAUTION PILOT LAMP that the engine lubricating oil eck. This lamp ( 6) warns the operator s dropped. pressure ha If it flashes, stop the engine and ch Check befor e starting: Lights up ed or running: Engine start When the en gine is started, the lub rication pressure i s formed and the lamps g o out. If the engine l ubrication pressur e d rops, warning pilo t lamp and central CA lash and buzzer will s ound intermittently.
BATTERY CHARGE CAUTION PILO T LAMP This lamp (7 ) warns the operator th at there is an abnormality i n the charging sys tem when the engine is running. Check befor e starting: Lights up ed or running: Engine start When the en gine is started, the alte rnator generates e lectricity and the lamp go es out. If any abnor mality occurs in the ch arging system, the caution pilot lamp and ce ntral CHECK lamp will flash. If they flash, check the uit. check charging circ