Komatsu — MACHINE MONITOR

. OPERATION EXPLANATION OF COMPONENTS METERS 3 - 15 FUEL GAUGE mount of fuel in the fuel tank. e green range during operation. This gauge (9) indicates the a E: Tank is EMPTY F: Tank is FULL The lamp should light up in th If it enters the red range durin g operation, the fuel gauge lamp and central CAUTION lamp will fla sh. If only the red range lights up during operation, it means that there is less than 40 liters (10.6 US g al) of fuel left, so check and add fuel. ENGINE WATER TEMPERATU RE GAUGE temperature of the cooling water. This gauge (10) indicates the If the temperature is normal d uring operation, the green range will light.

If the red range lights during operation, stop the machine and run the engine with no load at mi lights. If the lamps light up to th drange speed until the green range e 1st red level, the engine water central CAUTION lamp will flash; temperature gauge lamp and when the lamps light up to the 2nd red level, the alarm buzzer will also sound intermittently. TORQUE CONVERTER OIL TE MPERATURE GAUGE This gauge (11) indicates the temperature of the torque converter oil. If the temperature is norm al during operation, the green range will light. If the red range lights during operation, stop the machine and run the engine with no load at mi lights.

If the lamps light up to the 1 drange speed until the green range st red level, the torque converter oil temperature gauge lamp and central CAUTION lamp will flash; when the lamp lights up to the 2nd red level, the alarm buzzer will also sound intermittently. SERVICE METER al operation hours of the machine. This meter (12) shows the tot The service meter advances the machine is not traveling. while the engine is running - even if While the engine is running, g reen pilot lamp on the service meter flashes to show the service m eter advances. The service meter progresses by 1 when the engine is operated for one hour, regardless of the e ngine speed.