. OPERATION EXPLANATION OF COMPONENTS HAZARD LAMP SWITCH WARNING Use the hazard lamp only in emergencies. Using the hazard lamp when traveling may cause confusion for other machine operators. 3 - 21 This switch ( 8) is used in emergenc ies, such as whe n the machine breaks dow n and has to be parked on the road. ash. ON position : All turn signal lamps fl REMARK When this s witch is turned to the ON position, the turn direction indicator lam ps and turn indicator pil ot lamp flash, an d display lamp (A) lights up at the sam e time.
KICKDOWN SWITCH When the g earshift leve r is in 2nd, and the switch (9 ) at the t op of the knob of the lift arm control lever is pressed, the gear will shift en you need to increase the drawbar pull in digging gear will down to 1st. Use this wh operations. REMARK To cancel t he kick-down switch, operate the directional lever to REVERSE o r Neutral, o r operate th e gear shift lever t o any position other than 2 nd. It can a lso be can celed by operatin g the parking brake switch or turning the starting switch OFF. FRONT WIPER SWITCH f switch (10) to operate the front wiper. Turn rotary switch (A) o f switch (10 ) to operate the f ront wiper.
If push butto n (B) is pressed, washe r liquid will be spr ayed out onto the front gla ss while the button is b eing pressed. Position (a): (OFF) Stop Position (b): (INT) Intermittent wipe Position (c): Low-speed wiper d wiper Position (d): High-spee