Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION ADJUSTMENT SEAT ADJUSTMENT WARNING (B) Adjusting seat angle Move lever (2) up and push down on the rear of the seat to tilt it backward. 3 - 44 P ark the machine in a safe place and stop the engine when carryi ng out adjustment of the operato A djust the seat position at the b eginning of each shift or when op erators change A djust the seat so that the brake pedal can be depressed all the w ay dow n with t he operator's bac k against the backrest. (A) Fore-and-aft adjustment Pull lever (1) up, set the seat to the desired position, then rel the l ever. Fore-and-aft adjustment: 160 m (16 m Mov e lever (2) down and push down on the front of the seat t it forward.

Adjustment range: 13 degrees (Front tilt, rear tilt: 4 stages ea (C) Setting seat for operator's w Turn grip (3) to adjust the stren Adjustment range: (Target) 50 t (D) Adjusting backrest angle Mov e lever (4) up and move th e backrest to the front or rear. Adjustment range: Front 66 deg rees (3 degrees x 22 stages) Rear 72 deg rees (3 degrees x 24 stages) NOTI CE If the backrest is reclined too far, th e backrest may hit the rear glass, so use it in a position where it d oes not contact the glass. Whe n reclining the seat fully to tak e a rest, set the seat in the followi ng position. F ore-and-aft adjustment: Max. fr U p-down adjustment: Max. heig S eat angle adjustment:

Horizont R eclining adjustment: Fully tilte d backward 36 degrees (12 stages (E) Seat height adjustment Mov e lever (2) up/down, then m ove the seat up or down as d esired. Since lever (2) is also used for adjusting seat angl e, set the seat to the desire d height while adjusting the a Adjustment range: 60 mm (2.4 (F) A djusting headrest height Mov e the headrest up and dow Adjustment range: 50 mm (2.0