. OPERATION OPERATION ADJUST MIRROR WARNING ADJUST LEFT CONSOLE BOX WARNING position. NOTICE 2. With the lock lever (2) pulled up, use your other hand to grip the front of console box (1), then move it to the front or rear with your left and right hands. 3 - 89 Be sure to adjust the mirrors be fore starting work. If they are not adjusted properly, you cannot se cure the visibility and may be injured or may injure someone s eriously. Loosen nut (1) of the mirro r and adjust the mirror to a position from the operator's seat. position where it gives the best view In p articular, be sure to adju st the mirror so that people at t he rear left or right of the machine c an be seen clearly.
B efore adjusting the position of the left console box, always s et the parking brake lever to the LOCK position. A fter adjusting the position o f the left console box, push and pu ll the console box to the front an d rear to check that it is locked a o nd cannot move. If it is not locked properly, the console box may suddenl y move during oper ations, causing misoperation f the steering, forward-rever se, gear shift lever, and resulting in failure . The left console box can be a djusted by 90 mm (3.5 in) in 9 stages to th e front or rear. A djust it to the most suitable position to match the adjust ment of the operator's seat. 1.
Pull up lock lever (2) at the rear of console box (1) at side of the operator's se at, and set the lock lever to the FREE Do not grip the steering, forwar d-reverse, gear shift lever when r emoving console box (1). There is danger that the lever may break. 3. heard. Then pull up lock lever (2) and release it. Lock l ever (2) automatically returns to