. OPERATION OPERATION STARTING ENGINE NORMAL STARTING WARNING (2) and turn the key to the 3 - 93 Si t down in the operator's seat befor Do not att empt to start the engine by short-circuiting the engine starting circuit. Such an act may c ause serious bodily injury or fire. Check th at there are no persons or o bstacles in the surroundin g area, then sound the horn and st Exhaust g as is toxic. When starting t he engine in confined spaces, be particularly careful to ensur NOTICE Do not cr ank the starting motor conti nuously for more than 20 seconds. If the eng procedur Before st ine does not start, wait for e from Step 2.
arting the engine, check tha at least 2 minutes, then repeat the t the fuel control dial is in the low idling (MI On this m N) position. achine, to protect the turbo charger, a turbo protect function is provided. In cold weather, even i f fuel control dial (1) is moved immediat ely after starting the engine, the engine speed may not change fo r severa l seconds. If t he fuel control dial is in the FULL p osition, the engine will accelerate suddenly and cause damage to th e engine parts, so set it to an intermedi ate or low speed position. 1. T urn fu el control dial (1) to the l ow idling (MIN) position. If i t is i i n the h igh idling (MAX) positio MIN) position.
n, be sure to turn it to the low ow dling ( 2. I TART position (C). The engin