. OPERATION OPERATION allow it to cool down gradually, then stop it. 3 - 101 STOPPING EN NOTICE If th e engine is stop ped without allowing i t to cool down, th ere is danger that the service life in emergencies, nev If the engine overh of various parts of the er stop the engine sud eats, do not stop it sud 1. Lower the wo rk equipment to the ground. idling (MIN) positions and 2. Turn fuel con trol dial (1) in the low and run the engin e at low idling spee d for 5 minutes to allow the the engine to gra dually cool down. 3. Turn the key i n ignition switch (2) t o the OFF posit ion (A).
The engine w ill stop REMARK When engine starting switch (2) key is turned to the OFF engine stops, but the machine's main power urned off immediately. lag provided for the controller to memorize the us and then terminate the system. While this s position, the engine stops, but t ource is not t urned off immediatel This is a time lag provided for the us and then termin emorize the operation stat ate the system. While this process contin ues, the main powe r is maintained. The power holding time v aries depending on t he operation con dition. Also when the cooling fan is used for a cleaning p not turned off i urpose, the t s machine's ma mmediately, even if engine FF position.
This time lag i s provided to protect the hydraulic ci rcuit, an d in his case, the econds. machine's main power is maintained for seven 4. Remove the k ey from starting swit