Komatsu — SHIFTING GEARS

. OPERATION OPERATION up up up [F1-R1] [F1-R2] [F2-R1] [F2-R2] down down down Shift operation when [F1-R1] mode is set When the preset mode switch is turned ON, the [F1-R1] mode is set by default. After that, if the steering, directional, and speed lever is operated forward (forward travel operation), the transmission is shifted to F1. If it is operated back (reverse travel operation), the transmission is shifted to R1. Shift operation when [F1-R2] mode is set When the steering, directional, and speed lever is in the N position, if the up switch is pressed once, the mode is set to [F1-R2] mode.

After that, if the steering, directional, and speed lever is operated forward (forward travel operation), the transmission is shifted to F1. If it is moved back (reverse travel operation), the transmission is shifted to R2. Shift operation when [F1-R2] mode is set When the steering, directional, and speed lever is in the N position, if the up switch is pressed Twice, the mode is set to [F2-R1] mode. After that, if the steering, directional, and speed lever is operated forward (forward travel operation), the transmission is shifted to F2. If it is moved back (reverse travel operation), the transmission is shifted to R1.

Shift operation when [F2-R2] mode is set When the steering, directional, and speed lever is in the N position, if the up switch is pressed three times, the mode is set to [F2-R2] mode. After that, if the steering, directional, and speed lever is operated forward (forward travel operation), the transmission is shifted to F2. If it is moved back (reverse travel operation), the transmission is shifted to R2. 3 - 107 4. If it is desired to select another mode, press up switch (a) or down switch (b) on steering, directional, and s peed leve r (1) and display the desired mode on c ontrol panel B (multi-information). The types of mode and method of selection are as follows.