Komatsu — PRECAUTIONS FOR OPERATION

. OPERATION OPERATION PRECAUTIONS WHEN OPERATING BLADE PRECAUTIONS ON SLOPES IT IS PROHIBITED TO KEEP THE DOOR OPEN DURING OPERATIONS IT IS PROHIBITED TO MODIFY THE CAB GLASS IN ANY WAY THAT WILL OBSTRUCT THE VIEW 3 - 115 METHOD OF USING BLADE LIFT CYLINDER Do n ot carry out bac k grading operations with the c ylinder fully extended. There is high risk that an excessive load will b e brought to be ar on the cylinder. BE CAREFUL OF FU EL LEVEL If t he fuel level in the fuel tank becomes low whe n the machine is working on slopes, the engine may suck i n air be no cause of the an gle of the machine or the swayi ng of the machine.

This may make the en gine stop, s o be careful t to let the fuel level in the fuel tank become t oo low. achine is more ts up, add fuel W hen working on slopes where the angle of the m th im (A): (B): BE CAREFUL OF OI L LEVEL chine on sloped areas of more than 20°, fill all appropriate components with oil to H level. Whe n operating ma chine on sloped areas of more s with oil to H level. PRECAUTIONS WHEN ENGINE STOPS ON SLOPES If the engine stops w hile working or traveling on a h ill, immediately depress the brake pedal to bring the machin e to a co METHOD OF USING BRAKES the brakes, so avoid such operations.

The following action s cause premature damage to Us ing emergency brake at full speed Us ing brake with engine running at full speed in first gear (F1, R1) (Machine stall condit REMA RK Alwa ys depress the decelerator pedal to lower the engine speed before actuating the brak Alwa ys keep the do or closed when traveling or car If the door is open, t here is danger of damage from Fo r safety reason s, do not install anything on th Al ways keep the glass clean to ensure safety d