Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE WHEN REQUIRED CLEAN INSIDE OF COOLING SYSTEM WARNING *1: When using Komatsu Supercoolant (AF-NAC), there is no need to use a corrosion resistor. When no corrosion resistor is used, use the special cover (600-411-9000). Please consult your Komatsu distributor about the method of installing. When using corrosion resistor, use Komatsu genuine corrosion resistor. If you use another corrosion resistor, it may cause serious problems such as corrosion of the engine and parts of the cooling system that use light metals such as aluminum. The coolant has the important function of preventing corrosion as well as preventing freezing.

Even in the areas where freezing is not an issue, the use of antifreeze coolant is essential. Komatsu machines are supplied with Komatsu Supercoolant (AF-NAC). Komatsu Supercoolant (AF-NAC) has excellent anticorrosion, antifreeze and cooling properties and can be used continuously for 2 years or 4000 hours. As a basic rule, we do not recommend the use of any coolant other than Komatsu genuine supercoolant (AF-NAC). If you use another coolant, it may cause serious problems such as corrosion of the engine and parts of the cooling system that use light metals such as aluminum.

To maintain the anticorrosion properties of Supercoolant (AF-NAC), always keep the density of Supercoolant between 30% and 68%. 4 - 21 Immediately after t he engine is stopped, the c ooling wat er is at high temperatu re and the radiator i s under high internal press ure. If the rad iator cap i s removed i n this condition and the w ater is drained , it may cause burns. To prevent t his, wait for th e temperature to go dow n, then turn the c ap slowly t o release the internal pr essure. Start the engine an d clean th e inside of t he cooling syste m.. Whe n standing up or leaving the operator's seat, set the work equipment l ock lev er and par king brake l ever to the LOCK position .

For d etails when st arting the e ngine, see " CHEC KBEFORE STARTIN G ENGINE,AD JUST (PAGE 3-74)" and "STARTING ENGINE (PAG E 3-93 If the undercover is removed, there i s danger of touching t Never enter the are a at the re ar of th e machine when the e ngine is running Stop th e machine o n level gr ound when cleaning or ch anging the Clean t he inside of the coolin g system, chan ge the co olant according to the table below Antifreeze coolant Interval for cleaning inside of cooling system and changing antifreeze coolant Precautions for use Komatsu supercoolant (AF-NAC) Every two years or every 4000 hours whichever comes first 1*