Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE REMARK 4 - 32 ADJUST IDLER CLE The idler moves forwar worn. become As t hey b ecome worn, t here is side pl ay in th e idler , or th e idler turns at an angle, causing the track to come off or resulting in uneven wea r, so adjust as follows ressure when this ADJUSTING IN SIDEWAYS DIRECTION 1. Drive the machine f or 8 to 12 m (24 .4 to 3 6.6 ft) on flat ground, hen measure clear ance A (4 plac es: left, right, i nside outside) between the track fr ame and guid e plate. 2.

I f clearance A is mo re than 4 mm (0.158 remove bolt (1), hen t ake out shim, a nd adjust to th at the cl earance on one side s les s than 0.5 to 1 mm (0.020 to 0.039 i Ther e are two types of (thicknes s: 0.5 mm (0.0 2 in) and 1.0 m m (0.0 4 in)).