. MAINTENANCE SERVICE PROCEDURE pressure air filter (2). 2. Open inspection cover (3) under the front panel and pull up recirculation air filter (4) to remove it. REMARK If the filters cannot be cleaned with air or in water, replace them with new ones. CHECK, ADJUST AIR CONDITIONER REMARK If the V-belt has stretched and there is no more allowance for adjustment, replace the V-belt. 4 - 40 CLEAN AIR CONDITIONER AIR FILTER (FRESH/RECIRC FILTER) Clean the air cond itioner air filter if it becomes clogged or if th ere is dirt or oil In places where th ere is a lot of dust, clean the air filter once a week.
In addition, clean th e air conditioner air filter at the same time, when cleaning the engine ai 1. Open inspecti 3. Clean filters (2 ) and (4) with compressed air . If there is oil s tuck it is extremely dirty, wash it i it, dry it completely before in stalling it again CHECKING TENSION OF COMPRESSOR BELT wering the cooling If the driving belt s lackens, it is likely to slip, lo efficiency. Depres s the mid point between d (2) with a thumb (approx. 9 rive pulley (1) and compressor pulley 8 N (10 kg)) e very now and then to m ake sure that deflection amou nt (A) is approx . 15 mm to 18 mm (0.5 9 to 0.71 in).
When it is a new b elt, elongation is expected in the initial perio d of use, so be sure t replacement. o make an adjustment in a few days after the