Komatsu — EVERY 1000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE 3) Lower cover (2) slowly and open it. (The right side of the cover has a hinge.) The strainer can be seen at portion P at the top. (A): Machine's right side part. 4 - 60 4. Remove drain plug (P2) in the strainer c over, and drain the o (approx. 4 liters (1. 06 US gal)) collected inside the 5. Loosen mounting remove cover (6). 6. 7. Remove spring (7) Remove any dirt s , then remove straine tuck to strainer (8), diesel oil or flushing of the case at the s 8. Loosen mounting then remove cover 9. Remove strainer (1 10. Remove any dirt st uck to strainer (11), t hen wash it in clean diesel oil or flushing oil .

Wash the removed parts and the inside of th e case at the same t 11. Install the strainers 12. After installing, repl ace the element in th e power tra in oil filter. For details, see "REPL ACE POWER TRAIN OIL FILTER ELEMENT 13. Refill the specified quantity of oil throug h oil filler ( 14. After filling with oil, check that the oil is at the spe For details, see " CASE, ADD OIL (P If the spring or strai ner are damaged, re place them with a new