Komatsu — EVERY 2000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE 7. Remove bolts (5), then remove cover (6) and take out the strainer. REMARK CHANGE OIL IN DAMPER CASE, CLEAN DAMPER BREATHER WARNING 4 - 68 8. Wash the strai ner in clean diesel oil or flus 9. Install the strai 0. Add the refill a mount of engine oil through oil filler port (F), then When installin g cap to the tank, push it dow f the cap is not ins talled correctly, it will cause When installing th e cap, press the cap down, a nd turn it until it is securely in contact with the s 1. After adding oi l, check that the oil is at the s pecified level. For details, see "CHECK OIL LEV EL IN HYDRAULIC TANK, ADD O IL (PAGE 3-80)".

The oil is at high t emperature immediately after th e machine has been operated. Wait for the oil to cool down before carrying out maintenance. The undercover is heavy, so do not go directly un der the cover when opening or closing it. When rem oving bolts (2) and (3), carry out the oper ation at the rear of the point im mediately under the cover so that it is possible to esc ape at any time. Refill capacity: 1.6 liters (0.42 US gal) 1. Open the engi ne side cover on the left of the machine; you ca see dipstick (G ).