Komatsu — EVERY 4000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE EVERY 4000 HOURS SERVICE REPLACE ACCUMULATOR (FOR CONTROL CIRCUIT) WARNING If operations are continued after the performance of the be the a ask to 4 - 73 Maintenance for every 250, 500, 1000 a nd 2000 hou rs service should be carried out at the s The accumulator i s charged with high-pressu re nitrogen ga s, so mista ken operatio n may cause an explo sion, which will l ead to serious injury or d amage. When handling the accumulator, always do a s follows. The pressure i n the hydraulic circuit cann ot be complete ly removed . When removing the hydraulic e quipment, do not stand in the direction the operation.

that the oil spurts out when carrying out t he operatio n. In additio n, loosen the bolts sl owly when carrying out mble the accumulator. near flame or dispose of it in fire. oles in it or weld it. ll it, or subject it to any impact. Do not disasse Do not bring it near flame or dispose of it i Do not make h oles in it or weld it. Do not hit it, ro ll it, or subject it to any imp When disposin g of the accumulator, the gas must be re leased. Ple ase contact your Komatsu distrib utor to have this work carried out.

accumulator ha s dropped, it wi remaining pres failure on the m replace the acc possibl e to should be distributor CHECK WATE R PUMP Check the water pump and its relative pa rts for water leak, and i f anything a bnormal is found, call on your Komatsu distributor for re pairs or replacement. CHECK STARTING MOTOR Contact your Ko matsu distributor to hav e the starting motor ch If the engine is started frequently , have t his inspectio n carried out every 1 000 h