. ATTACHMENTS, OPTIONS HANDLING TRIMMING DOZER EVERY 2000 HOURS SERVICE CHANGE OIL IN HYDRAULIC TANK, REPLACE HYDRAULIC OIL FILTER ELEMENT AND CLEAN HYDRAULIC TANK STRAINER WARNING 6 - 9 Carry out the main tenance for EVERY 25 0 HOURS SERVIC E at the The oil is at high t emperature immediately af ter the machine has b een operated. Wait for the oil to co ol down before changing the oil. When removing th e oil filler cap (F), push th e cap d own t o releas e the internal pressure, then remov Refill capacity: 7 1 liters (18.76 U S gal) 1. 2. 3. 1. Lower the blad e to the ground, stop th e engine, th en mov e the blade to the fro nt and rear. 2.
Push down ca p of oil filler (F) to releas e the a ir an d remov e the internal pressu re. Keep cap pus remove cap. hed down, turn it slowly counterclockwise, then 4. Remove drain plug (1) at the bottom of the tank and lo osen drain valve (2). After draining th e oil, ti ghten drain plug (1 ) and drain valve (2) . When loosenin g drain valve (1), b e caref ul not to get oil on yo urself. 5. Remove bolts element. (3), then remove cover (4) and take out the 6. Clean the insid e of case and r emoved parts and install a new element.