Komatsu — FRONT PANEL

. OPERATION EXPLANATION OF COMPONENTS CAUTION ITEMS CAUTION (1) (2) Battery charge circuit caution lamp Maintenance caution lamp (3) Air cleaner clogging caution lamp (If equipped) BATTERY CHARGE CIRCUIT CAUTION LAMP This lamp (1) indicates a problem in the charging system while the engine is running. If the monitor lamp flashes, check the V-belt tension. If any problem is found, see "OTHER TROUBLE (PAGE 3-147)". REMARK This lamp may light up momentarily when the engine is started or when the engine is stopped. It does not indicate a problem.

3 - 9 If these caution lamp s flash, check and repair the appropriat e location as soon as NOTICE the machine on level ground and check the monitor lamps. Park the machine on level groun d and check the monitor l Confirm that moni tor lamps light up about 2 seconds after the starting switch is turned to t he ON position. If any monito r lamp does not light, con tact your Komatsu distributor to inspec t and repair. These are items w hich need to be observed when the engine is running. If any problem occurs, the item ne eding immediate repair is displayed. If there is any problem, the problem location on t he caution lamp will flash.