Komatsu — FRONT PANEL

. OPERATION EXPLANATION OF COMPONENTS REAR LAMP SWITCH This switch (5) lights up when the rear lamp and panel lamp light up. Q (OFF) position: Lights out l (ON) position: Lights on set to the cleaning mode. When the hand is withdrawn, the switch automatically returns to the Q position. When the cleaning mode is selected, the cooling fan reverse rotation pilot lamp lights up. If the switch cleaning mode, at a standstill. REMARK operation. 3 - 20 N SELECTOR SWITC tch (6) is turned to th e CLN position, the fan can b position e, the fan will return to the verse pilot lamp will go out. mode is used to dust off the g mode, the fan keep s turnin g at the fulle st speed.

n rotation selector s witch wh en the engin e starting switch key is in the ON p osition and the engine is ng procedures, see " CLEAN ING AND IN SPECTION OF FINS OF RADIAT OR, OIL COOLER AND ER (PAGE 4-35)". try to operate the fa n rotatio n selector s witch whil e the engine i s running, it does not respond to t he Instead the fan operation confirmation lamp begins to flash, telling you that the fan rotation speed switched. speed returns to the norma l mode when the eng ine is stopped o r the e ngine startin g switch key is turned to sition. an rotation selector switch is in the cleaning mode, the machine cannot be operated.

an rotation selector switch is in the clean ing mode , the machine cannot be operated