Komatsu — ELECTRIC POWER TAKE-OUT ADAPTER

. OPERATION EXPLANATION OF COMPONENTS REMARK The circuit breaker is a device installed in electric circuits where a large current flows. It is installed to protect the electric circuit. It protects the electric components and wiring from damage caused by an abnormal current in the same way as a normal fuse. After repairing and restoring the location of the abnormality, there is no need to replace the breaker. It can be used again. ELECTRIC POWER TAKE-OUT ADAPTER NOTICE The power for the cigarette lighter is 24V. Do not use it as the power source for 12V equipment.

The cigarette lighter socket (1) can be used as a power source for 24V equipment and the accessory socket (2) can be used for 12V equipment. Capacity of cigarette lighter : 120W (24V x 5A) Capacity of accessory socket : 60W (12V x 5A) 3 - 47 CIRCUIT BREAKER does not work even when the starting If th e starting switch does swit ch is turne d to the ON position, o pen t he recirculat ed air fi lter cove r to gain a ccess t o the circuit b reaker. If ex cessive cu rrent flo ws through t he circui t breaker , it cuts off the electric circuit t o prevent damage to the electrical g.

circuit after it has been cut off, push in damage components a nd wirin To r estore the electric een rese If th t button (3 e electric c ). (This ircuit is springs normal, out w reset hen the button circuit is (3) will st cut off.) ay pushed in. I f it comes out immediately whe n it is pushed in, t he electric circu it must be checke d. 2) also act as reset button (3). Circuit breakers ( 1) and ( 2) also act as reset b utton (3). No Fuse capacity Circuit (1) 20A Starting switch (2) 20A Air conditioner