Komatsu Bulldozer Manual (EN)

COVER

TEN00374-00 BULLDOZER D475A -5E0 SERIAL NUMBERS 30126 and up Unsafe use of this machine may cause serious injury or death. Operators and maintenance personnel must read this manual before operating or maintaining this machine. This manual should be kept near the machine for reference and periodically reviewed by all personnel who will come into contact with it. Komatsu has Operation & Maintenance Manuals written in some other languages. If a foreign language manual is necessary, contact your local distributor for availability. WARNIN WARNIN NOTICE NOTICE

Стр. 1

BEFORE READING THIS MANUAL

. FOREWORD BEFORE READING THIS MANUAL Read, understand and in this manual and on the machine before performing Komatsu cannot the machine is used. Always keep this in the location shown on the right so that all relevant personnel can read it at any time. Location to keep operation & maintenance manual In door pocket inside of cab door If this manual is lost or replacement. For details the past are given in ( ). The explanations, on the latest information available as of the this machine may lead to (For example: 1 been shipped.

If this certain safety devices and specifications that are whether your product complies with the applicable standards and regulations of your country, consult Komatsu or your Komatsu distributor before operating the machine. 1 - 2 DING THIS MANUAL ails of the operation and methods o f inspection and maintenance f se the machine safely. Most accide nts are caused by the failure to and maintenance of machines. follow all precautions and warning ance.

Failure to do so may result in ict every circumstance that might involve a potential hazard wh essages in this manual and on the machine may not include all po eration, inspection, or maintenanc e under conditions that are not ur responsibility to take the necess ary precautions to ensure safet e prohibited uses or actions describ ed in this manual. Improper op hazardous and could result in seri ous injury or death. , be sure to give this manua l to the new owner together with the m eration and Maintenance Manua r damaged, contact your distributo r immediately to arrange for its serial No. you will need to provide y our Komatsu distributor, see "TA OR (PAGE 1-8)".

nternational units (SI) for units of m easurement. For reference, uni ues, and illustrations in this manu al have been prepared based te of its publication. Continuing im provements in the design of t t are not reflected in this manual. C onsult Komatsu or your Komat oncerning your machine or with qu estions regarding information c les in the illustrations correspond t o the numbers in ( ) in the text. (1)) hines that comply with all applicabl e regulations and standards of t machine has been purchased in a nother country, it may lack ce necessary for use in your countr

Стр. 3

SAFETY INFORMATION

. FOREWORD SAFETY INFORMATION SAFETY INFORMATION followed. This hazardous situation which, if not avoided, will This signal word indicates a potentially hazardous situation which, if not avoided, could This signal word indicates a potentially hazardous situation exists which, if not avoided, The following are used to alert you to information that must be followed to avoid damage to the machine. 1 - 3 To enable you to use the machine safel y, and to prev ent injury to operators , service personnel or bystanders, the warnings the machi always To i dentify important safety messages in the manual an d on the m achine labels, the following sig nal words are used.

The Alert Symbol" messages on machines, in manuals, and elsewhere. When you see this symbol, be al ert to the risk of personal inj ury or deat h. Follow t he instructions in th e safety message. imminently ult in death o r serious injury ult in death o r serious injury y result in mi nor or moderat signal word s precaution i s given where the machi ne may be damaged or the ser vice life reduce d if precaution is not followed. s word is use d for informati on that is u seful t o know.

Стр. 4

FRONT/REAR, LEFT/RIGHT DIRECTIONS OF MACHINE

. FOREWORD INTRODUCTION INTRODUCTION 3-141)" and "RIPPER OPERATION FRONT/REAR, LEFT/RIGHT DIRECTIONS OF MACHINE (1) (A) (B) Operator's seat Front Rear (C) (D) Left Right In this manual, the terms front, rear, left, and right refer to the travel direction as seen from the operator's seat when the operator's seat is facing the front. 1 - 4 USE OF MACHINE This Komatsu machine is designed to be used mainly for the following work: Dozing Cutting into hard or f rozen ground or ditchin Felling trees, removing stumps Pushin Ripping For furthe (PAGE details, se LLDOZER (PAGE

Стр. 5