OPERATION 12.1.3 ADJUSTMENT BEFORE OPERATION ADJUSTING OPERATOR’S SEAT WARNING Park the machine in a safe place and stop the engine when carrying out adjustment of the operator's seat. Adjust the seat before starting operations or when changing operators. Check that you can depress the brake pedal fully with your back against the seat backrest. A: Forward-backward adjustment Pull lever (1) up, and move the seat to the desired position, then release the lever to lock in place. For-and-aft adjustment: 120 mm (4.7 in.) (16 mm (0.63 in.) x 10) B: Adjusting the seat angle Pull the lever (2) up and push down on the rear of the seat to tilt it backwards.
Push the lever (2) down and push down on the front of the seat to tilt it forward. Range of adjustment: 13 C: Adjusting the seat weight Turn grip (3) to adjust the strength of the suspension. Adjustment range: (Target) 50 kg - 120 kg (110.3 - 264.6 lb) D: Adjusting the backrest angle Move the lever (4) and move the backrest to the front or rear. Adjustment range: Front 24 E: Seat height adjustment Move the lever (2) up/down, then move the seat up or down as desired. Because the lever (2) is also used for adjusting the seat angle, set the seat to the desired height while adjusting the angle. Adjustment range: 60 mm (2.36 in) F:
Adjusting the headrest height Move the headrest up and down to the desired height. Adjustment range: 50 mm (2 in.) G: Adjusting the headrest angle Adjustment: 60 H: Adjusting the armrest angle Adjust angle of the armrest by rotating knob (5) (left side only). Adjustment range: 30 Also, when the armrest is turned, it will spring up. WA450-3MC 2-45