OPERATION The hold switch maintains the same transmission gear. Recommended for use when traveling up or down a slope. 2. DIRECTIONAL LEVER This lever changes the machine’s direction of travel. The engine cannot be started if the directional lever is not in neutral. Position 1: Forward Position N: Neutral Position 2: Reverse REMARKS The lever length can be adjusted to 3 stages (positions A, B, C). To adjust the length, remove the screw at the bottom of the lever knob and slide the knob to the desired position. Tighten the screw. The lever is installed to Position (B) when shipped from the factory. 3.
SPEED CONTROL LEVER STOPPER This stopper prevents the speed control lever from entering the 3rd position when working. Position 1: Stopper actuated Position 2: Stopper released WA450-3MC 2-25