hitachi — Removal and Installation of Pump Device

BODY (UPPERSTRUCTURE) / Pump Device Installation 1. Attach a nylon sling onto plug (19) (with an eyebolt attached). Hoist and align main pump (6) with the mounting hole on the engine. Install main pump (6) to the engine with socket bolts (21) (4 used). Remove plug (19) (with an eyebolt attached) from the regulator. Install reducer (20). : 10 mm : 90 N m (9 kgf m, 66 lbf ft) : 81 N m (8 kgf m, 60 lbf ft) 2. Connect the connector of pump delivery pressure switch (17) to priority valve (10). 3. Connect hoses (15, 16) to pilot pump (14). : 41 mm 6 W4GB-02-04-017 10 17 W4GB-02-04-016 : 27 mm : 78 N m (8 kgf m, 57.5 lbf ft) 14 : 137 N m (14 kgf m, 101 lbf ft) :

32 mm 15 16 W4GB-02-04-018 W2-6-4 19 21 20